SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Verifying the WAN Subsystem
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
3-3
Verifying the WAN Subsystem Processes and
Objects
5. Verify that the SNMP agent processes that support the SNMP trap multiplexer
processes are in the STARTED state by using the SCF STATUS PROCESS
command:
STATUS PROCESS $snmp-agent-process
6. Verify that the WAN subsystem processes (ConMgr, TFTP server, SNMP trap
multiplexer, and WANBoot processes) are in the STARTED state by using the SCF
STATUS PROCESS command:
STATUS PROCESS $ZZWAN.#*
Verifying That the WAN Subsystem Processes Are Started on page A-27 shows
the output of this command.
7. Verify that the SWAN concentrator ADAPTER object and its subordinate objects
are in the STARTED state by using the SCF STATUS ADAPTER command with
the SUB ALL option:
STATUS ADAPTER $ZZWAN.#adapter, SUB ALL
Verifying That a SWAN Concentrator is Started on page A-30 shows the output of
this command.
8. Verify that the WAN subsystem devices (DEVICE object) are in the STARTED state
by using the SCF STATUS DEVICE command:
STATUS DEVICE $ZZWAN.#device-name
Verifying That a WAN Subsystem Device is Started on page A-28 shows the
output of this command.
For information about starting a WAN subsystem process or object, see Starting
the WAN Subsystem Processes and Objects on page 3-4.