SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Installing and Using the SWAN Tools
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
5-9
SWT Error Dumps
Line Operation mode.........0
Task Global Data Addr.......0x005c14dc
Global Data Size............0x000003c5
Task Code Addr..............0x0061335c <-- DLC1 Start Address
Task Execution Address......0x0061335c
Task Code Size..............0x0000e1fc <-- DLC1 Code Size
SNMP taskConfig req addr....0x005c225c
Pre-defined task name.......DLC1
Task Status.................3(started)
DLC0 Start Addr: 0x62ebdc Size: 0x11fc6 End Addr: 0x640BA2
DLC1 Start Addr: 0x61335c Size: 0xe1fc End Addr: 0x62D058
PC Address which caused the Exception: 0x0063cb1a
It is clear that the Instruction fell within the DLC0 range.
Offset within DLC which caused the Exception: 0x63cb1a - 0x62ebdc
= 0xDF3E
SWT Error Dumps
A sample stack frame is shown to illustrate the output with a dump file caused by a
SWT timeout error.
Running Task ID...............[0x00330000]3342336
Task Name.....................[444c 4330]DLC0
Stack Pointer (A7)............0x0064f4b8
Dump caused by ISR
Frame Pointer (A6)............[0x0064f50c]6616332
Faulted Address...............[0x0041eea8]4320936
pSOS/pNA Error Dumps
This example of QUEST shows the output with a dump file caused by pSOS/pNA
errors.
Running Task ID...............[0x00230000]2293760
Task Name.....................[4455 4d50]DUMP
Stack Pointer (A7)............0x00664308
Dump caused by pSOS/pNA error
PC Register...................[0x0040f322]4256546
Error Code....................0