SWAN Concentrator Installation and Support Guide

SWAN Concentrator Installation and Support Guide—429391-006
ix
About This Guide
The SWAN Concentrator Installation and Support Guide describes how to install and
maintain a ServerNet wide area network (SWAN) concentrator on HP Integrity
NonStop BladeSystems, HP Integrity NonStop NS-series, or HP NonStop S-series
systems. This guide includes the following:
•
Step-by-step instructions for installing, removing, and replacing a SWAN
concentrator.
•
Procedures for diagnosing problems.
•
Procedures for updating the SWAN kernel firmware using the OSM Service
Connection (preferred method) or the TSM Service Application.
•
A description of the supported electrical signals and the wiring of cables and
connectors provided by HP for use with the SWAN concentrator.
Who Should Use This Guide
This guide is written for anyone who installs or maintains the SWAN concentrator.
How This Guide Is Organized
Table i. Contents
Section or
Appendix Title Contents
1 Introduction to the
SWAN
Concentrator
Provides a high-level overview of the architecture and
components of the SWAN concentrator.
2 Installing a SWAN
Concentrator
Describes how to install, remove, and replace a SWAN
concentrator. This section also explains how to update
the SWAN firmware and diagnose problems.
3 Using OSM to
Update SWAN CLIP
Firmware
Describes how to update SWAN CLIP firmware using
the OSM Service Connection.
4 Using TSM to
Update SWAN CLIP
Firmware
Describes how to update SWAN CLIP firmware using
the TSM Service Application.