SWAN Concentrator Installation and Support Guide

Using OSM to Update SWAN CLIP Firmware
SWAN Concentrator Installation and Support Guide—429391-006
3-3
Step 2: Check the Location and Version of the
SWAN Firmware
6. Click OK.
The Progress list shows the status of the CLIP action.
7. Wait until all CLIPs are stopped before proceeding.
Step 2: Check the Location and Version of the SWAN Firmware
1. In the OSM Service Connection, look under the Firmware heading in the Attribute
pane for SWAN CLIPS. The location and the version of the SWAN firmware is
displayed. The location and version of the SWAN firmware object code file for the
RVU is:
$SYSTEM.CSSnn.C7953P00
where nn is the number of the SYSTEM.SYSnn
2. In the OSM Service Connection, check the Firmware Version attribute to determine
the firmware version currently running.
Step 3: Initiate the Firmware Update
1. From the Action list, select Firmware Update.
2. Click Add or Add all.
3. Click Perform Action.
4. The SWAN Firmware Update dialog box appears. Click OK.
VST951.vsd