SWAN Concentrator Installation and Support Guide

Diagnosing and Correcting SWAN Concentrator
Problems
SWAN Concentrator Installation and Support Guide—429391-006
A-7
What to Do if the SWAN Fast Firmware Update Fails
(TSM)
To stop the SWAN adapter object, you can also enter the SCF STOP
command. For example:
12> SCF STOP ADAPTER $ZZWAN.#51, SUB ALL
c. Check if the SWAN adapter is stopped in TSM or use the SCF STATUS
SERVER command:
13> SCF STATUS SERVER $ZZWAN.#51.*
5. After the SWAN objects are stopped, try to update the SWAN CLIPs again.
If you are still having trouble stopping the SWAN object, see Support Note S04029
and the SWAN Concentrator and WAN Subsystem Troubleshooting Guide topic
“Correcting SWAN Concentrator Hardware Problems.”
If you still have trouble using the guided procedure, see Step 6: Initiate the Firmware
Update Using TSM on page 4-10 to update the SWAN firmware.