System Generation Manual for G-Series RVUs

About This Manual
System Generation Manual for G-Series RVUs—523407-001
ix
Your Comments Invited
•
Guardian Disk and Tape Utilities Reference Manual
This manual describes how to use the disk and tape utilities for the HP NonStop
Kernel operating system. The utilities are BACKCOPY, BACKUP, Disk
Compression Program (DCOM), Disk Space Analysis Program (DSAP),
RESTORE, and TAPECOM. This manual is written for system operators, system
managers, and all other users of the disk and tape utilities.
•
Guardian User’s Guide
This guide provides introductory information and task-oriented instructions for
using the HP Tandem Advanced Command Language (TACL) and various
Guardian environment utilities. The utilities and procedures described in this guide
include many of the more common operations tasks that users will need to perform
on a system running the HP NonStop Kernel operating system.
•
HP S-Series Operations Guide
This guide describes how to perform routine system hardware operations for
NonStop™ S-series servers. These tasks include monitoring the system,
performing recovery operations, operating disk and tape subsystems, performing
routine hardware maintenance, and starting and stopping the system. This guide is
written for system operators.
•
SCF Reference Manual for G-Series RVUs
This manual describes the operation of the Subsystem Control Facility (SCF) on
G-series RVUs and how it is used to configure, control, and inquire about
supported subsystems. SCF is the configuration and management tool used by
persons responsible for configuring system objects or monitoring their status.
•
TSM Configuration Guide
This hypertext online guide contains planning and configuration information that
you will use to configure your NonStop S-series server and system console for
TSM operations. It also describes how to customize your TSM configuration to
include features such as remote access and remote notification. This guide is
written for operations, system administration, and support personnel who are
responsible for planning and configuring a NonStop S-series server and system
console for TSM operations.
Your Comments Invited
After using this manual, please take a moment to send us your comments. You can do
this by:
•
Completing a Contact NonStop Publications form online at
http://nonstop.compaq.com/view.asp?FOID=20.
•
Faxing or mailing the form, which is included as a separate file in Total Information
Manager (TIM) collections and located at the back of printed manuals. Our fax
number and mailing address are included on the form.