System Generation Manual for G-Series RVUs

SYSGENR Messages
System Generation Manual for G-Series RVUs—523407-001
A-20
SYSGENR Message Descriptions
Cause. You have specified an invalid value for the PARAM XLLINKCPU command.
The processor numbers must be two two-digit numbers, using leading zeros, if
necessary, and with no spaces between them. (For example, PARAM XLLINKCPU
0910 is correct for processors 09 and 10). The processors specified must be in the
system and running. This message is displayed on the home terminal.
Effect. SYSGENR ignores the invalid numbers and continues with the default
numbers for XLLINK (the processor SYSGENR is running on and the next available
processor).
Recovery. Correct the command and rerun SYSGENR.
Cause. You have specified an incorrect option to PARAM PROMPT. This message
appears in the body of the listing, at the point where the error was detected.
Effect. SYSGENR finishes scanning the CONFTEXT file and then terminates.
Recovery. Enter PARAM PROMPT YES (to cause BACKUP to give its standard
prompt) or NO (to cause BACKUP to give prompts appropriate for an automatic tape
changer). Then rerun SYSGENR.
Cause. The FORMATTER_TEMPLATE_FILES entry specified is an invalid file name.
Effect. SYSGENR finishes scanning the CONFTEXT file and then terminates.
Recovery. Correct the CONFTEXT file and rerun SYSGENR.
Cause. You have specified an incorrect unload option in the PARAM UNLOAD
command. Valid options are YES and NO.
Effect. SYSGENR defaults the UNLOAD option to YES.
Recovery. Correct the PARAM command and rerun SYSGENR.
INVALID PARAM XLLINKCPU SPECIFIED. PARAM WILL BE IGNORED
INVALID PROMPT OPTION SPECIFIED. TAPE PROMPT WILL BE USED.
INVALID TEMPLATE FILE: filename
INVALID UNLOAD OPTION SPECIFIED. TAPE WILL BE UNLOADED.