System Generation Manual for G-Series RVUs

SYSGENR Messages
System Generation Manual for G-Series RVUs—523407-001
A-22
SYSGENR Message Descriptions
Cause. The string dd mmm yyyy hh:mm is the date that the object file was last
accelerated, where dd=day, mmm=month, yyyy=year, hh=hour, and mm=minute.
Effect. SYSGENR continues.
Recovery. Informational message only; no corrective action is needed.
Cause. The SYSGENR internal table space is exhausted. This message appears in
the body of the listing, at the point where the error was detected.
Effect. SYSGENR terminates.
Recovery. To avoid this problem, try naming fewer files in the ALLPROCESSORS
paragraph. You can combine several files into one by using BIND. Rerun SYSGENR.
Cause. SYSGENR has attempted to allocate too many system processes. This
message appears in the body of the listing, at the point where the error was detected.
Effect. SYSGENR terminates.
Recovery. Gather the items listed on page A-1, then call your service provider.
Cause. In the STANDARD_MICROCODE entry of the CONFTEXT file, the files listed
or the referenced CONFAUX DEFINES entry do not contain a file with the EHLO
attribute.
Effect. SYSGENR terminates.
Recovery. Check to be sure that you didn't remove a needed file from the
STANDARD_MICROCODE entry. If you didn't remove the file, then this is an internal
problem; gather the items listed on page A-1, then call your service provider.
Cause. The microcode file filename is not listed. This message appears in the
body of the listing, at the point where the error was detected.
Effect. SYSGENR terminates.
LAST ACCELERATED : dd mmm yyyy hh:mm
LIBRARY TABLE OVERFLOW
MAP SPACE OVERFLOW
MILLICODE FILE WITH EHLO REQUIRED; NONE WAS SUPPLIED
MISSING MICROCODE FILE: filename