System Generation Manual for G-Series RVUs

SYSGENR Messages
System Generation Manual for G-Series RVUs—523407-001
A-31
SYSGENR Message Descriptions
Cause. You have entered a PARAM RESUSESYSFILES command to reuse system
code and system library files.
Effect. SYSGENR continues.
Recovery. Informational message only; no corrective action is needed.
Cause. The version of the SWID DDL process being used by SYSGENR is not
compatible with the version of SWID on the system. The version of SWID is probably
older than the version of SYSGENR.
Effect. SYSGENR continues to normal completion if there are no other errors.
However, SYSGENR does not obtain or record object file fingerprints in the
OSCONFIG file.
Recovery. Install the new version of SWID.
Cause. SYSGENR needs the SMON and SMP files in order to create the Safeguard
$SMP process. However, one of them is missing.
Effect. SYSGENR finishes scanning the CONFTEXT file and then terminates.
Recovery. Ensure that SYSGENR can find the SMON and SMP files; then rerun
SYSGENR.
Cause. A DP2 $SYSTEM has been generated, and BACKUP2 has been used to
generate the system image tape (SIT). This message appears in the body of the listing
and on the home terminal.
Effect. SYSGENR continues.
Recovery. Informational message only; no corrective action is needed. Use a B10 or
later version of RESTORE to copy the system image to disk before you run the next
SYSGENR.
REUSESYSFILES SET ! TSC AND TSL WILL BE REUSED.
REVISION OF SWID PROCESS IS NOT COMPATIBLE WITH THIS VERSION
OF SYSGEN
SAFEGUARD OBJECT FILE MISSING : filename
SIT IS FOR DP2 SYSTEM DISC. USE RESTORE2, OR B10 OR LATER
RESTORE TO RESTORE IT