System Generation Manual for G-Series RVUs

Index
System Generation Manual for G-Series RVUs—523407-001
Index-5
S
SECURENUNU, PARAM command 3-14
Segment address
in system process map 5-13
in system spaces map 5-8
SID
creating 4-3/4-8
specifying number you want 3-21/3-23
SIT
as output from SYSGENR 1-7
creating 4-9/4-11
specifying number you want 3-21/3-23
Site update tape (SUT)
See SUT
SIV listing in CONFLIST report 5-19
Software configuration, performing 1-2/1-3
changing your configuration 1-3
installing a new RVU 1-2
installing an IPM 1-2
STANDARD_MICROCODE,
ALLPROCESSORS paragraph entry 2-10
Stopping and restarting SYSGENR 1-7
Subsystem Control Facility (SCF), using for
online configuration
SUPER_SUPER_IS_UNDENIABLE,
ALLPROCESSORS paragraph entry 2-4,
2-11
SUT
as input for SYSGENR 1-4
contains system library files 2-11
SWID
assigning 3-4
used by SYSGENR 1-3
SYSCLR NLD log, in CONFLIST report 5-4
SYSDISC file, disk bootstrap file 4-12
SYSGENR
command file containing SYSGENR
commands 3-24
CONFLIST report 5-1/5-20
creating a SID 4-3/4-8
creating a SIT 4-9/4-11
defined 1-1
SYSGENR (continued)
D-series, comparing with
G-series D-1/D-4
G-series, comparing with
D-series D-1/D-4
input files for 1-4/1-6
messages 1-6, A-1/A-43
offline configuration with 1-1
output from 1-6
preprocessing commands
ASSIGN commands 3-2/3-7
PARAM commands 3-7/3-20
programs invoked by 1-3
system management 1-7/1-9
work files
See Work files, SYSGENR
SYSGEN^BACKUPPARAM, PARAM
command 3-15, 3-21
SYSGEN^DISKGENPARAM, PARAM
command 3-16, 3-21
SYSGEN^TAPE, ASSIGN command 3-3,
3-21
SYSINFO command example 2-14
SYSnn subvolume
FILES_TO_COPY_TO_NEW_
SYSTEM destination 2-5
location for files of new operating
system 4-12
location of current 2-14
specified in ALLPROCESSORS
paragraph 2-13/2-14
specifying a new 2-13, 2-14
System code and system library
files, provided by HP 1-5
listed in SYSCLR NLD log 5-4
listed in system spaces maps 5-8/5-12
listed in XLLINK log 5-5
specified by
SYSTEM_LIBRARY_CODE_FILES
entry 2-11