System Generation Manual for G-Series RVUs

Contents of the CONFTEXT File
System Generation Manual for G-Series RVUs—523407-001
2-3
ALLPROCESSORS Paragraph
Each entry is described in alphabetic order in Table 2-1 on page 2-4.
You begin the ALLPROCESSORS paragraph with the following statement:
ALLPROCESSORS:
The syntax for an ALLPROCESSORS paragraph entry is shown here.
ALLPROCESSORS-term
is one of the names listed in Table 2-1 on page 2-4.
value
is described in the definitions of the entries in Table 2-1.
;
terminates the entry.
The following example lists the ALLPROCESSORS paragraph entries in the order they
are explained on the following pages.
Table 2-1 briefly describes the entries in the ALLPROCESSORS paragraph. These
entries can appear in any order. Refer to Appendix D, Comparing SYSGENR for
D-Series RVUs With SYSGENR for G-Series RVUs, for a table of obsolete
ALLPROCESSORS paragraph entries and their G-series replacements.
ALLPROCESSORS-term [ value ] ;
ALLPROCESSORS:
COLDLOAD_DISK_LOWPIN ;
FILES_TO_COPY_TO_NEW_SYSTEM TANDEM^FILES^TO^COPY;
FORMATTER_TEMPLATE_FILES TANDEM^FORMATTER^TEMPLATE^FILES;
INITIAL_COMMAND_FILE $SYSTEM.STARTUP.CIIN;
MICROCODE_FILES TANDEM^STANDARD^MICROCODE;
STANDARD_MICROCODE TANDEM^STANDARD^MICROCODE;
SUPER_SUPER_IS_UNDENIABLE ;
SYSTEM_LIBRARY_CODE_FILES TANDEM^LIBRARY^CODE^FILES;
SYSTEM_PROCESS_CODE_FILES TANDEM^PROCESS^CODE^FILES;
SYSTEM_PROCESS_LIBRARY_FILES TANDEM^PROCESS^LIBRARY^FILES;
SYSTEM_PROCESSOR_TYPE NSR-T;
SYSTEM_VOLUME_SUBVOL $SYSTEM.SYS00;
TAPE_LABEL_PROCESSING DISABLED;