System Generation Manual for G-Series RVUs

Contents of the CONFTEXT File

System Generation Manual for G-Series RVUs—523407-001

2-13

SYSTEM_PROCESS_LIBRARY_FILES (Required)

This entry defines user library files for DP2. Through SYSGENR, the native linker

program (NLD) links these files to the DP2 file. If you use the CONFAUX file (the

normal procedure), you need enter only the installation descriptor

TANDEM^PROCESS^LIBRARY^FILES. The form of this entry is shown here.

If you do not use the CONFAUX file, you must list the

SYSTEM_PROCESS_LIBRARY_FILES entry, followed by the names of user library

files required for your system. For multiple files, enter a comma (,) after each file name

and a semicolon (;) after the last file name listed.

The following is an example of a SYSTEM_PROCESS_LIBRARY_FILES entry for a

G-series RVU.

SYSTEM_PROCESSOR_TYPE (Required)

To differentiate NonStop S-series systems, you must specify the processor type. On

G-series RVUs, it is not necessary to change this value when you change the

processor type, except when you migrate from a HP NonStop S7000 to a S7x000

server.

The following example shows an entry that specifies the processor type for a NonStop

S72000 server.

If you have more than one type of processor in your system, this value should be the

processor type of CPU 0.

For a complete list of available processor types, refer to the HP S-Series Planning and

Configuration Guide.

SYSTEM_VOLUME_SUBVOL (Required)

This entry specifies the system volume and subvolume that is to contain the new

version of the operating system image and the system-dependent and RVU-dependent

software.

If DSM/SCM indicates that using SYSGEN to generate a new system image is required

for the update you are performing, you are asked to specify a different SYSnn than the

current, generally by incrementing the octal nn value.

SYSTEM_PROCESS_LIBRARY_FILES TANDEM^PROCESS^LIBRARY^FILES;

SYSTEM_PROCESS_LIBRARY_FILES $S11B.ZDP2.MVINDP2,

$S11B.ZDP2.TDRVRS;

SYSTEM_PROCESSOR_TYPE NSR-T;