System Generation Manual for G-Series RVUs

Contents
System Generation Manual for G-Series RVUs—523407-001
ii
2. Contents of the CONFTEXT File
2. Contents of the CONFTEXT File
DEFINES Paragraph (Optional) 2-1
ALLPROCESSORS Paragraph 2-2
COLDLOAD_DISK_LOWPIN (Optional) 2-4
FILES_TO_COPY_TO_NEW_SYSTEM (Required) 2-5
FORMATTER_TEMPLATE_FILES (Required) 2-6
INITIAL_COMMAND_FILE or INITIAL_COMINT_INFILE (Required) 2-6
STANDARD_MICROCODE (Required) 2-10
SUPER_SUPER_IS_UNDENIABLE (Optional) 2-11
SYSTEM_LIBRARY_CODE_FILES (Required) 2-11
SYSTEM_PROCESS_CODE_FILES (Required) 2-12
SYSTEM_PROCESS_LIBRARY_FILES (Required) 2-13
SYSTEM_PROCESSOR_TYPE (Required) 2-13
SYSTEM_VOLUME_SUBVOL (Required) 2-13
TAPE_LABEL_PROCESSING (Optional) 2-14
3. Using Preprocessing Commands
Overview 3-1
ASSIGN Command 3-2
Assigning a Tape Drive 3-3
Assigning SYSGENR Program Names 3-3
Making SYSGENR Work Files Permanent 3-4
PARAM Command 3-7
PARAM BACKUPONLY 3-9
PARAM BINDER^COMMANDS 3-9
PARAM DENSITY 3-9
PARAM EXTENTSIZE 3-10
PARAM PROMPT 3-11
PARAM REUSEDP2 3-12
PARAM REUSESYSFILES 3-12
PARAM REUSETEMPLATES 3-14
PARAM SECURENUNU 3-14
PARAM SYSGEN^BACKUPPARAM 3-15
PARAM SYSGEN^DISKGENPARAM 3-16
PARAM TAPEMODE 3-17
PARAM UNLOAD 3-18
PARAM WORKFILE 3-19
PARAM XLLINKCPU 3-20