System Generation Manual for G-Series RVUs

Using Preprocessing Commands
System Generation Manual for G-Series RVUs—523407-001
3-22
Combining ASSIGNs and PARAMS for the Number
of SIDs and SITs You Want
4. 1 or more
SIDs and
1 or more
SITs
PARAM
SYSGEN^DISKGEN
PARAM"text"
PARAM
SYSGEN^BACKUPP
ARAM "text"
1. Create the first SID.
2. Prompt for another SID until you specify
NO.
3. Create the first SIT.
4. Prompt for another SIT until you specify
NO.
5. 0 SIDs and
1 SIT
ASSIGN
SYSGEN^TAPE,
$tapename
1. Create the SIT without issuing a BACKUP
prompt.
6. 1 SID and
no SITs
PARAM
SYSGEN^DISKGEN
PARAM"text ! "
1. Create the SID without issuing a prompt.
2. (The ! indicates that you want only one
SID.)
7. 1 or more
SIDs and
no SITs
PARAM
SYSGEN^DISKGEN
PARAM"text"
1. Create the SID without issuing a prompt.
2. Prompt for another SID until you specify
NO.
3. Prompt for BACKUP or EXIT (answer
EXIT).
8. 1 SID and
1 SIT
PARAM
SYSGEN^DISKGEN
PARAM"text ! "
ASSIGN
SYSGEN^TAPE,
$tapename
1. Create the SID without issuing a prompt.
2. Prompt for another SID until you specify
NO.
3. Create the SIT without issuing a
$tapename prompt.
9. 1 SID and
1 SIT
PARAM
SYSGEN^DISKGEN
PARAM"text"
PARAM
SYSGEN^BACKUPP
ARAM "text ! "
1. Create the SID without issuing a prompt.
2. Prompt for another SID until you specify
NO.
3. Create the SIT without issuing a prompt.
Table 3-3. SID and SIT Options (page 2 of 3)
No. Quantity PARAM Command SYSGENR Processing Sequence