System Generation Manual for G-Series RVUs

Using Preprocessing Commands
System Generation Manual for G-Series RVUs—523407-001
3-23
Combining ASSIGNs and PARAMS for the Number
of SIDs and SITs You Want
10. 1 SID and
1 or more
SITs
PARAM
SYSGEN^DISKGEN
PARAM"text"
PARAM
SYSGEN^BACKUPP
ARAM "text "
1. Create the SID without issuing a
prompt
.
2. Prompt for another SID until you specify
NO.
3. Create the SIT without issuing a prompt.
4. Prompt for another SIT until you specify
NO.
11. 1 or more
SIDs and
1 SIT
PARAM
SYSGEN^DISKGEN
PARAM"text"
ASSIGN
SYSGEN^TAPE,
$tapename
1. Create the SID without issuing a prompt.
2. Prompt for another SID until you specify
NO.
3. Create the SIT without issuing a
$tapename prompt.
12. 1 or more
SIDs and
1 SIT
PARAM
SYSGEN^DISKGEN
PARAM"text"
PARAM
SYSGEN^BACKUPP
ARAM "text ! "
1. Create the SID without issuing a prompt.
2. Prompt for another SID until you specify
NO.
3. Create the SIT without issuing a prompt.
Table 3-3. SID and SIT Options (page 3 of 3)
No. Quantity PARAM Command SYSGENR Processing Sequence