System Generation Manual for G-Series RVUs

Running DSM/SCM and SYSGENR

System Generation Manual for G-Series RVUs—523407-001

4-11

Responding to Further BACKUP Prompts

After entering BACKUP options, the BACKUP banner appears and the system image

is written to tape:

BACKUP Program - T9074ACR (26MAY95)

$tape : Not Ready?

Mount a reel of tape (with a write-enable ring) on the appropriate tape drive and bring it

on line. Press RETURN twice on the terminal to start the backup operation. When

BACKUP finishes, it displays a response like the following:

Summary Information

Files dumped = 271 Files not dumped = 0

Do you want to write another system image tape?

[Y(es)/N(o)]

Remove the completed SIT and physically label it with its contents and date of

creation. You can run BACKUP as many times as you wish. If you enter “No” to

terminate BACKUP, you are asked to confirm:

Repeat ‘NO’ to terminate SYSGEN

[Y(es)/N(o)]

Enter “No” to terminate BACKUP. SYSGENR closes the CONFLIST file and

terminates with a message to the screen like the following:

System Disk space required for tape cold load is 217 MBytes.

STOPPED: 2,75

CPU time: 0:02:06.522

1:Process terminated with warning diagnostics