System Generation Manual for G-Series RVUs

System Generation Manual for G-Series RVUs—523407-001
A-1
A SYSGENR Messages
The following messages are generated by SYSGENR and are listed in alphabetic
order. There are three types of messages:
•
Those that are sent to the home terminal.
•
Those that are found in the SYSGENF and CONFLIST log files at the point where
an error was detected.
•
Those that appear at the end of the SYSGENF and CONFLIST files to indicate
termination status.
The type of message is indicated in the message description.
Items Needed Before Contacting Your Service
Provider
You will need to gather the following items if the message you receive directs you to
contact your service provider. These items supply HP with the information needed to
help resolve the problem.
1. The VPROC (Version PROCedure) of SYSGENR (by recording the results of the
following command):
> VPROC SYSGEN2
2. On a backup tape, a copy of the CONFLIST file
3. On a backup tape, a copy of the CONFAUX file
4. On a backup tape, a copy of any file mentioned in the error or warning message
5. If the message is an NLD, BIND, or XLLINK error or warning message, the
VPROC of NLD, BIND, or XLLINK (by recording the results of one of the following
commands):
> VPROC NLD
> VPROC BIND
> VPROC XLLINK
Note. These items apply only if you are running SYSGENR outside of DSM/SCM.