TACL Reference Manual

UTILS:TACL Commands and Functions
HP NonStop TACL Reference Manual—429513-018
8-7
:UTILS:TACL Command Descriptions
Only super-group users (user ID 255,n) can execute the commands in Table 8-3.
:UTILS:TACL Command Descriptions
The remainder of this section contains descriptions of the syntax for the commands
and functions in :UTILS:TACL and the programs used by TACL.
Table 8-3. Super-Group User Commands
Command or Function Description
ADDDSTTRANSITION
Command (Super-Group Only)
Adds entries to daylight savings time transition table
ALARMOFF Program (Super-
Group Only)
Turns off NonStop VLX system audio alarm
BUSCMD Program (Super-
Group Only)
Alerts operating system that a bus is (or is not) available
for use
LIGHTS Program (Super-Group
Only)
Controls processor panel lights
RCVDUMP Program (Super-
Group or Super ID Only)
Receives a dump from a halted processor over an
interprocessor bus
RECEIVEDUMP Command
(Super-Group Only)
Receives a dump from a halted processor over an
interprocessor bus (runs RCVDUMP).
Not supported on H-series systems.
RELOAD Program (Super-Group
Only)
Reloads operating system image into a processor that
was previously halted
SETTIME Command (Super-
Group Only)
Sets system date and time-of-day clocks
XBUSDOWN/YBUSDOWN
Command (Super-Group Only)
Alerts operating system that a bus is not available for
use
XBUSUP/YBUSUP Command
(Super-Group Only)
Alerts operating system that a bus is available for use