TACL Reference Manual

UTILS:TACL Commands and Functions
HP NonStop TACL Reference Manual—429513-018
8-53
DEFAULT Program
DEFAULT Program
Use the DEFAULT program to set your logon (saved) default system, volume, and
subvolume names, and to set your logon disk file security. The logon defaults are in
effect whenever you log on.
run-option
is any of the options described in the RUN[D|V] Command on page 8-156.
default-names
are the volume and subvolume names that are to be your logon defaults; that is,
these are the current defaults when you log on or enter the VOLUME command
without any parameters. You can also specify a logon default node name. TACL
uses the current default node, volume, and subvolume names to expand partial file
names.
The form of default-name is:
[\node-name.] volume-or-subvolume-names
\node-name
is the node name that is to be your default when you log on or enter the
SYSTEM command without parameters. If you omit node-name, your logon
default system does not change.
volume-or-subvolume-names
is the name of your logon default volume or subvolume or both. These are your
current defaults when you log on or enter the VOLUME command without any
parameters.
For volume-or-subvolume-names, specify one of:
$default-volume-name
default-subvolume-name
$default-volume-name.default-subvolume-name
$default-volume-name
is the name of your new logon default volume. If you omit $default-
volume-name, the current default volume is your new logon default.
default-subvolume-name
is the name of your logon default subvolume. If you omit default-
subvolume-name, the current default subvolume becomes your new
logon default.
DEFAULT [ / run-option [ , run-option ] ... / ] default-names
[‚"default-security"] ‚"default-security"