TACL Reference Manual

UTILS:TACL Commands and Functions
HP NonStop TACL Reference Manual—429513-018
8-147
RELOAD Program (Super-Group Only)
NOSWITCH
bus
$volume
subvolume.filename
NOSWITCH
specifies that, when a VLX, CLX, CYCLONE or NSR-L processor is
reloaded, there is no default autoswitch of controller ownership to the
configured primary processor.
bus
specifies whether the X bus or the Y bus is used for the transfer of the
operating-system image to the processor during the RELOAD operation.
0 = X bus
1 = Y bus
The default option is the X bus.
$volume
specifies a volume other than $SYSTEM where the operating system
image (SYSnn.OSIMAGE) to be used for reloading the processor is
located.
subvolume.filename
specifies a subvolume and file where the operating system image to be
used for reloading the processor is located. If subvolume is not specified,
the default subvolume in effect at the time the RELOAD command is
issued is used.
*
specifies that all failed processors should be reloaded.
HELP
displays a help screen summarizing the RELOAD command syntax and giving an
example of RELOAD. The help screen is also displayed if you enter RELOAD with
no parameters and no IN file-name.
Considerations
•
To use the RELOAD command, you must have a group ID of 255.
Note. The PRIME and NOPRIME parameters do not have any effect on how the
RCVDUMP command operates. They are, therefore, no longer described in the
RCVDUMP command description.