TACL Reference Manual

UTILS:TACL Commands and Functions
HP NonStop TACL Reference Manual—429513-018
8-183
SET DEFINE Command
OWNER
{ group-name.user-name } |
{ group-num.user-num }
Specifies the owner of all jobs created by any
process using the DEFINE
The numeric form of user ID must be enclosed in
quotes. The default is the user ID of the spooler
request initiator.
PAGESIZE num Specifies the number of lines per page, in the range
from 1 through 32767, to be used by PERUSE when
it performs a LIST or PAGE command
The de-fault is a size specified by the creating
process or, if no such process exists, the default
page size of PERUSE.
REPORT report-name Specifies a report name, 1 to 16 characters in length,
to be printed in the job header created by any
process using the DEFINE
It can contain any alphanumeric characters, but must
begin with a letter. If it contains spaces, it must be
enclosed in quotes. The default is the group-
name.user-name of the owner.
SELPRI num Specifies the selection priority, in the range from 0
through 7 (0 is lowest), of jobs created using the
DEFINE
The default is 4.
Table 8-5. SPOOL DEFINE Attributes (page 2 of 2)
Name and Value Function