TACL Reference Manual

HP NonStop TACL Reference Manual—429513-018
B-1
B Error Messages
TACL can generate several types of errors. Table 5-1 on page 5-21 lists the types of
TACL errors and a sample display, description, and typical action for each type of
error.
The first subsection describes:
•
TACL Error Messages - the text and meaning of each TACL error message and
warning.
Following subsections describe more specialized error messages :
•
DEFINE Error Messages on page B-46
•
Process Creation Error Messages on page B-50
•
RCVDUMP Error Messages on page B-51
•
RELOAD Error Messages on page B-58
•
EMS Messages on page B-69
Finally, Table B-2 on page B-70 lists error numbers that can be obtained from function
calls, including a call to #ERRORNUMBERS. The explanations of those errors can be
found in the alphabetic listing.
TACL Error Messages
General TACL error messages are preceded by *ERROR*. Some of the messages in
the following list may appear following another error message to give additional
information; when that occurs, the messages appear in parentheses, without the
*ERROR* prefix.
Cause. For a RUN command with the PORTTACL option, the user must have a 255
group ID.
Effect. The TACL process ABENDs (terminates abnormally).
Recovery. Use a LOGON with a user group ID of 255 and execute the RUN
command again.
Caution. TACL text messages might change at anytime. You should not write TACL macros
or routines that are dependent on the format of text messages.
ABENDED: $XX
CPU time: 0:00:00.018
Termination Info: 24
TACL fatal error: super-group privilege required