TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-7
TACL Error Messages
Recovery. Use #ERRORNUMBERS to see the subcode (nnn) that indicates the
specific cause of the error:
Adjust and retry the call to #NEWPROCESS. If errors recur, contact your service
provider.
Cause. The #DELTA command you entered had a syntax error.
Effect. The command is ignored.
Recovery. Correct the command and reissue the request.
Cause. You selected a device that is not on the system. file-name indicates the file
specified.
Effect. The requested operation is ignored.
Recovery. Check that you have the correct device name. Check your defaults.
Cause. You attempted to perform a (#)SET operation on a variable whose type is
DIRECTORY.
Effect. The requested operation is ignored.
Recovery. Specify a variable of a type other than DIRECTORY in the (#)SET
operation.
Cause. You specified the same exception more than once in a #FILTER.
Subcode Meaning
0 Unable to convert a DEFINE name to network form.
1 Indicates that flags.<10> = 1 and flags.<11:12> <> 0 and you are trying
to create a process on a remote system that is a NonStop 1+, or any
other NonStop system operating under operating system RVU B20 or
earlier; the use of DEFINEs is not allowed.
2 Internal context propagation error.
3 Illegal DEFMODE supplied.
*ERROR* Delta syntax error
*ERROR* Device does not exist [ , File: file-name ]
*ERROR* Directory contents cannot be set
*ERROR* Duplicate exception in this statement