TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-13
TACL Error Messages
Recovery. See the Guardian Procedure Errors and Messages Manual for corrective
action for the error number indicated by nnn.
Cause. TACL could not change its home terminal when you tried to set #MYTERM.
Effect. The requested operation is ignored.
Recovery. Use a terminal name acceptable to the operating system.
Cause. The file was not produced by BINDER, or BINDER malfunctioned.
Effect. The requested operation is ignored.
Recovery. Contact your service provider.
Cause. When starting a process, you specified an illegal home terminal, or the
specified home terminal does not exist.
Effect. The requested operation is ignored.
Recovery. Check that you have correctly identified the home terminal.
Cause. You used IEEE floating-point format in program and attempted to run it in a
processor that does not support IEEE floating-point format.
Effect. The operating system does not allow the creation of the process.
Recovery. The PROCESSOR_GETINFOLIST_ Guardian procedure call can be used
to determine if a processor can run IEEE floating-point instructions. For more
information about this procedure, see the Guardian Procedure Calls Reference
Manual.
Cause. You specified a CPU number that is not in the range 0 through 15.
Effect. The requested operation is ignored.
Recovery. Specify a CPU number within the allowed range.
*ERROR* GUARDIAN SETMYTERM failed
*ERROR* Header INITSEGS not consistent with size
*ERROR* Hometerm error
*ERROR* IEEE floating point support not available on CPU
*ERROR* Illegal CPU number