TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-25
TACL Error Messages
Cause. TACL received error <n> unexpectedly from operating system procedure
PROCESS_GETINFO_.
Effect. For each of these errors, #ERRORNUMBERS is set:
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for a
description of PROCESS_GETINFO_ errors. The error information and the context in
which the error occurs may suggest a recovery action. If not, contact your service
provider.
Cause. The operating system RVU predates the D40 RVU and does not support the
system procedure PROCESS_LAUNCH_:
Effect. The specified process is not started.
Recovery. None. Either upgrade the system to use the function or do not use it.
Cause. When attempting to start or modify a process, you specified a process name
that is invalid because the name exists already or the name was incorrectly specified.
Effect. The requested operation is ignored.
Recovery. Check that you specified the process name correctly. Use the STATUS
command to see if the process name exists already and who owns the process.
Cause. When trying to run a program, you specified the same name for the program
and the library. This problem is detected by the operating system.
Effect. The requested operation is ignored.
Recovery. Try the command again with the correct program and library names.
*ERROR* PROCESS_GETINFO_ error = <n>, error^detail = <d>
First number 1150, 1151, 1152, or 1153
Second Number <n>
Third number <d>
Fourth number 0
*ERROR* #PROCESSLAUNCH built-in not supported in this TOS
version
*ERROR* Process name error
*ERROR* Program file and library file specified are same
file: text