TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-31
TACL Error Messages
Effect. The LOGON operation is ignored.
Recovery. None. (You can, however, log on to the remote system under an allowable
ID, start a TACL process locally on that system, and then log on as the super ID.)
Cause. You attempted to define the lower end of a range in a structure and failed to
supply a number, or the number was not terminated by a colon or closing parenthesis.
Effect. The requested operation is ignored.
Recovery. Correct the range specification.
Cause. You attempted to define the upper end of a range in a structure and failed to
supply a number, or the number was not terminated by a closing parenthesis.
Effect. The requested operation is ignored.
Recovery. Correct the range specification.
Cause. Either all communication paths to the specified system are down, or the
system itself is down.
Effect. The requested operation is ignored.
Recovery. Wait until the system is available.
Cause. The system address for selectable segments has changed.
Effect. The requested operation is ignored.
Recovery. Contact your service provider.
Cause. An internal buffer was exceeded.
Effect. The requested operation is ignored.
*ERROR* Syntax error in lower bound
*ERROR* Syntax error in upper bound
*ERROR* System not available
*ERROR* System’s base address for selectable segments has
been changed.
*ERROR* TACL internal buffer too small