TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-40
TACL Error Messages
Cause. #DELTA was unable to perform the requested edit.
Effect. The requested operation is ignored.
Recovery. A prior message indicates the specific problem.
Cause. The command you entered is not a valid #DELTA command.
Effect. The requested operation is ignored.
Recovery. A prior message indicates the specific problem.
Cause. You pressed a function key (CTRL/A, for example) that is not recognized by
TACL.
Effect. The requested operation is ignored.
Recovery. Reissue the function key, making sure that it is valid.
Cause. You attempted to run a program that calls procedures it is not authorized to
call. The super ID must license program files, by means of the FUP LICENSE
command, to enable them to execute such procedures.
Effect. The requested operation is ignored.
Recovery. Check the name of the program. If you need to run the program, have the
super ID license the program.
Cause. You used a floating-point format that is not recognized by the system.
Effect. The operating system does not allow the creation of the process.
Recovery. Use an appropriate floating-point format.
*ERROR* Unable to perform edit
*ERROR* Unknown delta command
*ERROR* Unknown function key
*ERROR* Unlicensed privileged program: text
*ERROR* Unrecognised floating point type in object file
*ERROR* Unsupported CPRULES file version