TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-49
DEFINE Error Messages
Effect. The operation is ignored.
Recovery. Correct the value, then reissue the request.
Cause. You attempted to reset a required DEFINE attribute.
Effect. The operation is ignored.
Recovery. None; you cannot reset a required DEFINE attribute.
Cause. You failed to supply a required parameter.
Effect. The operation is ignored.
Recovery. Add the missing parameter, then reissue the request.
Cause. You supplied an attribute that is not allowed for the current CLASS.
Effect. The operation is ignored.
Recovery. Correct the attribute for the current CLASS, then retry the operation.
Cause. Either file-system buffer space was not available or there is not enough room
in the process file segment (PFS). For example, too many files are open or too many
no-wait I/O operations are outstanding.
Effect. The operation is ignored.
Recovery. Close some files, wait for no-wait I/O to finish, then try again. Check the
system for processes that use too much buffer space. If the problem persists, call your
service provider.
Cause. There was not enough memory available to perform the requested operation.
Effect. The operation is ignored.
Recovery. Wait, then try again. If the problem persists, check the system for
processes that use too much memory.
Required attribute - Cannot be reset
Required parameter is not supplied
There is no attribute " attr" for the current class
Unable to obtain file system buffer space
Unable to obtain physical memory