TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-55
RCVDUMP Error Messages for H-Series, G-Series
and D-Series
Cause. You attempted to dump a processor that had not been through the reset-load
sequence.
Effect. No processor is dumped.
Recovery. Do the reset-load and then retry the command.
Cause. You attempted to dump a processor that is running.
Effect. No processor is dumped.
Recovery. Specify the number of a processor that is not running.
Cause. A partial dump may have been taken of the specified processor.
Effect. The CPU may or may not have been dumped, as shown in the displayed
lights.
Recovery. Check the lights. If they are %177777, the dump was taken successfully; if
they are not %177777, reset-load the processor and reenter the command.
Cause. You specified an invalid file name.
Effect. No processor is dumped.
Recovery. Specify a valid file name.
Cause. You specified an invalid CPU number.
Effect. No processor is dumped.
Recovery. Specify a valid CPU number
Cause. You specified something else when only PRIME or NOPRIME was expected.
CPU nn IS RUNNING, CANNOT BE DUMPED.
CPU nn MAY HAVE BEEN PARTIALLY DUMPED TO
file-name. IF THE LIGHTS OF THE DUMPED
CPU ARE NOT %177777, THEN PLEASE REDO THE
RESET-LOAD AND RECEIVEDUMP SEQUENCE.
INVALID dump-file-name.
INVALID cpu NUMBER, THE ALLOWED VALUES ARE 0: nn.
INVALID PARAMETER, THE ALLOWED VALUES ARE
[ PRIME NOPRIME ].