TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-63
RELOAD Error Messages for H-Series, G-Series
and D-Series
Cause. An attempt was made to reload the indicated CPU, but the CPU was not
configured at system generation time.
Effect. CPU nn is not reloaded.
Recovery. Correct the CPU number and reissue the command.
Cause. A bad CPU number was indicated. The optionally supplied step # nn indicates
the execution step where the problem occurred:
Effect. The reload of the indicated CPU fails.
Recovery. Correct the CPU number and reissue the command.
CPU nn reload FAILED: bad cpu number [, step # nn].
01 to 09 Initialization and sending initial boots (microcode and bootstraps)
20 to 29 Common logic for sending packets over the bus (either initial boots or
CPU image)
30 to 39 Setting breakpoints
80 to 99 Starting processing in the reloaded CPU, including sending the
destination control table (DCT) starting processes, TMF initialization,
setting the clock, and so on.