TACL Reference Manual

Error Messages
HP NonStop TACL Reference Manual—429513-018
B-66
RELOAD Error Messages for H-Series, G-Series
and D-Series
Cause. An attempt was made to do more than one reload at the same time. The
optionally supplied step # nn indicates the execution step where the problem occurred:
Effect. The reload of the indicated CPU fails.
Recovery. Coordinate your reload with anyone else who is also attempting a reload.
Cause. The attempted reload of the indicated CPU was successful.
Effect. The indicated CPU is reloaded.
Recovery. Informative message; no corrective action needed.
Cause. The same system-image file name was indicated more than once.
Effect. What you typed (XXXXXX) is returned in uppercase along with the error.
Recovery. Correct the file name for the system-image and reissue the command.
Cause. The indicated command was ignored.
Effect. What you typed (XXXXXX) is returned in uppercase along with the error.
Recovery. Correct and reissue the command.
CPU nn reload FAILED: simultaneous RELOAD attempted [, step #
nn].
01 to 09 Initialization and sending initial boots (microcode and bootstraps)
20 to 29 Common logic for sending packets over the bus (initial boots or CPU
image)
30 to 39 Setting breakpoints
80 to 99 Starting processing in the reloaded CPU, including sending the
destination control table (DCT) starting processes, TMF initialization,
setting the clock, and so on.
CPU nn reloaded successfully.
duplicate osimage filename.
XXXXXX: ignored