Tandem Capacity Model (TCM) Manual

Recovery
Edit the MeasTCM control file and remove the erroneous CONVERTTO entry or entries.
75
Invalid CONVERTTO parameter in control file
Cause
The parameter following the CONVERTTO keyword in the MeasTCM control file does not
represent a valid processor type.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and correct the CONVERTTO parameter.
77
Invalid CPUPOWER type parameter in Control file
Cause
The CPU TYPE value (first parameter) for the CPUPOWER keyword is not correct for the CPU
TYPE.
Effect
The program terminates. No CSV files are produced.
Recovery
Correct the value of the first parameter for this keyword.
78
Invalid CPUPOWER factor parameter in Control file
Cause
The CPUPOWER value (second parameter) for the CPUPOWER keyword is not in the correct
format, is not numeric, or is zero.
Effect
The program terminates. No CSV files are produced.
Recovery
Correct the value of the second parameter for this keyword.
79
Invalid Measure data file(s)
Cause
The specified Measure data file or files are not valid given the other parameters specified in the
MeasTCM control file.
Effect
The program terminates. No CSV files are produced.
Recovery
Check the MeasTCM control file for CSVLO and CSVHI values, the start and stop times of the
Measure data files specified. For further information, check the run summary produced.
80
CSVHI earlier than actual start time
Cause
The user-specified CSVHI is earlier than the start time of the first Measure data file specified.
Effect
The program terminates. No CSV files are produced.
206 MeasTCM Error Messages