Tandem Capacity Model (TCM) Manual

Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and add an ACTUALDISK44 entry defining the disks of subtype
44.
106
More than one ACTUALDISK53 entry in control file.
Cause
The MeasTCM control file contains more than one ACTUALDISK53 entry.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and remove the erroneous ACTUALDISK53 entry or entries.
107
Invalid ACTUALDISK53 parameter in control file.
Cause
The parameter following the ACTUALDISK53 keyword in the MeasTCM control file does not
represent a valid disk of subtype 53.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and correct the ACTUALDISK53 parameter.
108
Disk Subtype is 53. ACTUALDISK53 keyword required.
Cause
The measurement data file or files contain disk entity records for disks of subtype 53, and the
ACTUALDISK53 entry is not present in the MeasTCM control file.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and add an ACTUALDISK53 entry defining the disks of subtype
53.
109
DISKCONVERTTO write cache status must be ON or OFF.
Cause
The second parameter following the DISKCONVERTTO keyword in the MeasTCM control file
does not represent a valid write cache status.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and correct the DISKCONVERTTO second parameter representing
write cache status.
110
More than one ACTUALDISK51 entry in control file.
212 MeasTCM Error Messages