Tandem Capacity Model (TCM) Manual

Cause
The MeasTCM control file contains more than one ACTUALDISK51 entry.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and remove the erroneous ACTUALDISK51 entry or entries.
111
Invalid ACTUALDISK51 parameter in control file.
Cause
The parameter following the ACTUALDISK51 keyword in the MeasTCM control file does not
represent a valid disk of subtype 51.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and correct the ACTUALDISK51 parameter.
112
Disk Subtype is 51. ACTUALDISK51 keyword required.
Cause
The measurement data file or files contain disk entity records for disks of subtype 51, and the
ACTUALDISK51 entry is not present in the MeasTCM control file.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and add an ACTUALDISK51 entry defining the disks of subtype
51.
113
Invalid read seek time parameter for DISKFACTOR keyword in control file.
Cause
The disk read seek time (fifth parameter) for the DISKFACTOR keyword is not in the correct
format; it is not a positive number between 01.00 to 09.99.
Effect
The program terminates. No CSV files are produced.
Recovery
Correct the value of the read seek time parameter for this keyword.
114
Invalid write seek time parameter for DISKFACTOR keyword in control
file.
Cause
The disk write seek time (sixth parameter) for the DISKFACTOR keyword is not in the correct
format; it is not a positive number between 01.00 to 09.99.
Effect
The program terminates. No CSV files are produced.
Recovery
Correct the value of the write seek time parameter for this keyword.
115
MeasTCM Termination Messages 213