Tandem Capacity Model (TCM) Manual

Invalid or Blank IPU count parameter in CPUFACTOR Keyword.
Cause
The IPU count value (fifth parameter) for the CPUFACTOR keyword is not in the correct format;
it is not numeric.
Effect
The program terminates. No CSV files are produced.
Recovery
Correct the value of the IPU count parameter for this keyword.
116
Invalid parameter for NUMTMFTRAIL Keyword.
Cause
The parameter following the NUMTMFTRAIL keyword in the MeasTCM control file does not
contain a valid numeric between 1 and 16.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and correct the NUMTMFTRAIL parameter.
117
More than one ACTUALDISK52 entry in control file.
Cause
The MeasTCM control file contains more than one ACTUALDISK52 entry.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and remove the erroneous ACTUALDISK52 entry or entries.
118
Invalid ACTUALDISK52 parameter in control file.
Cause
The parameter following the ACTUALDISK52 keyword in the MeasTCM control file does not
represent a valid disk of subtype 52.
Effect
The program terminates. No CSV files are produced.
Recovery
Edit the MeasTCM control file and correct the ACTUALDISK52 parameter.
121
Measure data contains XP disk (subtype 52). DISKCONVERTO SAS disk
necessary.
Cause
• The measurement data file or files contain disk entity records for disks of subtype 52, and
the DISKCONVERTTO keyword is not present in the MeasTCM control file.
• The measurement data file or files contain disk entity records for disks of subtype 52, and
the first parameter of the DISKCONVERTTO keyword does not contain a disk of subtype
51 in the MeasTCM control file.
Effect
The program terminates. No CSV files are produced.
214 MeasTCM Error Messages