Tandem Capacity Model (TCM) Manual

Warning: This Measure file does not overlap previous valid file.
Cause
This Measure data file was started after the previous file ended. There is no overlap.
Effect
The CSV files will not be 100 percent precise because there is a gap in the measurement window.
Recovery
If this situation is unacceptable, re-create Measure files by using intervals instead of Measure
stops and starts.
Collection interval not available; computed as stop time - start time.
Cause
The collection interval was not specified for this Measure file.
Effect
MeasTCM calculated the interval as stop time - start time.
Recovery
None.
This CSV file has a low % linkage between processes and discopens.
Cause
The percent of linkage between the Measure PROCESS entities and DISCOPEN entities is below
90 percent.
Effect
The CSV files might be as precise as they can be.
Recovery
This situation is unacceptable. This situation might be caused by having a large number of remote
opens and not having the Measure files of the remote system. Check that you have Measure
files for all the systems affected and try MeasTCM again.
Program terminated because some Measure data files cannot be used.
Cause
MeasTCM could not continue because one or more of the Measure files could not be used.
Effect
The program terminates. CSV files are not created.
Recovery
This is a global advisory message. One or more detailed messages with the actual errors will
precede this message. Use those messages to determine the required recovery.
Stop time not available for this file; set as user-specified CSVHI.
Cause
A stop time was not specified for this Measure file.
Effect
MeasTCM uses the specified CSVHI as the stop time.
Recovery
None.
Warning: The start and stop time lies outside user-specified window.
Cause
The time range for this Measure file lies outside the window specified by CSVLO and CSVHI.
218 MeasTCM Error Messages