Tandem Capacity Model (TCM) Manual

Effect
MeasTCM does not use this Measure file.
Recovery
This situation is unacceptable. Change the values for CSVHI, CSVLO or both values in the
MeasTCM control file if the Measure file is to be included.
Warning: This file will not be used to generate CSV file(s).
Cause
MeasTCM ignores this Measure file.
Effect
MeasTCM ignores this Measure file.
Recovery
A previous message indicates why the Measure file is not used. See the recovery for that message.
User specified time window outside actual time window of data files.
Cause
The time window specified by the user as CSVLO and CSVHI is outside the actual time range
as determined by the earliest start time and latest stop time of all Measure data files.
Effect
The program terminates. CSV files are not created.
Recovery
Correct the CSVLO and CSVHI entries in the MeasTCM control file.
No valid Measure data files within user-specified time range.
Cause
No valid Measure files were found with a time range within the CSVLO and CSVHI time range.
Effect
The program terminates. CSV files are not created.
Recovery
Correct the CSVLO and CSVHI entries in the MeasTCM control file.
Warning: One or more measure file error occured.
Cause
A Measure file error occurred on the Measure data file.
Effect
MeasTCM declares the Measure file invalid and stops using it.
Recovery
The Measure file is probably full (error 45). If the resulting CSV files are not acceptable, new
Measure files are needed. Create larger Measure files, use fewer intervals, or use a smaller time
window.
Empty CSV file. No processes found.
Cause
MeasTCM could not find any process records in the Measure file for the time specified.
Effect
None. MeasTCM continues with the next Measure file.
Informational Messages 219