Tandem Capacity Model (TCM) Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

Figure 7 Template Control File

! CNTLFILE T6042H01^ABD (24JUL13)

! This is a sample MeasTCM control file which defines MeasTCM

! processing requirements. This file must be modified to

! include actual data before it can be used.

!***********************************************************************

! Syntax for environmental entries

! --------------------------------

! MEASURE data-file [measfh]

! where: data-file a disk file containing measurement data

! measfh the name of an object file containing a MEASFH

! program; the default is the current

! $SYSTEM.SYSnn.MEASFH.

! CSVLO yyyy/mm/dd;hh:mm:ss

! CSVHI yyyy/mm/dd;hh:mm:ss

! these entries define the time window used to filter the data in

! all the specified MEASURE files.

! APPL application

! where: application the name of the application for the MEASURE

! data sample (max 20 characters); this is a

! required entry.

! CONVERTTO t u

! where: t the output CPU type; this entry is required

! when the measurement data file(s) contain(s)

! different CPU types.

! Allowed values are: NSE-AD,NSE-AB(2-CORE),NSE-AB(4-CORE),

! NSE-AB,NSE-M,NSE-W,NSE-S,NSE-K,NSE-I,NSE-T,NSE-Q,NSE-A,

! NSE-B,NSE-D,NSR-Z,NSR-H,NSR-Y,NSR-X,NSR-V,NSR-J,NSR-E,

! NSR-D,NSR-T,NSR-G,NSR-W

! u the output NSK version; this entry is required

! when t (first parameter of CONVERTTO) is

! different from the CPU type(s) contained in

! the measurement data file(s).

! Allowed values (as per TCM) are as follows :

! Value of t Corresp. value(s) of u

! ---------- ----------------------

! NSE-AD J06

! NSE-AB(2-CORE) J06

! NSE-AB(4-CORE) J06

! NSE-AB J06

! NSE-AE J06

! NSE-M J06

! NSE-W J06

! NSE-S H06

! NSE-K H06

! NSE-I H06

! NSE-T H06

! NSE-Q H06

! NSE-A H06

! NSE-B H06

! NSE-D H06

! NSR-Z G06

! NSR-H G06

! NSR-Y G06

! NSR-X G06

! NSR-V G06

! NSR-J G06

! NSR-E G06

! NSR-D G06

! NSR-T G06

! NSR-G G06, G05, G03, G02

! NSR-W G05, G03, G02

! CPUFACTOR t [r] xxxx.yy s [i]

! where: t the CPU type for which the default

! conversion factor will be overriden.

! Allowed values are: NSR-W,NSR-G,NSR-T,NSR-D,

! NSR-E,NSR-J,NSR-V,NSR-X,NSR-H,NSR-Y,NSR-Z,NSE-A,

34 Using MeasTCM