Tandem Capacity Model (TCM) Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

! NSE-D,NSE-B,NSE-Q,NSE-T,NSE-K,NSE-I,NSE-S,NSE-M,

! NSE-W,NSE-AD,NSE-AB(2-CORE),NSE-AB(4-CORE)/NSE-AB,

! NSE-AE.

! [r] the OS release level,G H or J.

! This is optional. The default is G.

! xxxx.yy the new conversion factor for CPU type t;

! this is a positive number between 0001.00 and

! 9999.99.

! s Type,Subtype of the CPU.

! this is required only for new CPU type.Type,subtype

! is not overridden for existing CPUs.

! Both Type and Subtype are numeric values

! separated by the delimiter ','.

! [i] IPU Count of the CPU type t;

! this is applicable only for multi-core CPUs.

! CSVDATA data-file

! The CSVDATA <name> is a string that contains the first 5 characters

! of the CSV file(s) to be downloaded to the workstation. If the CSVDATA

! keyword is not specified, the default is CSVDA in the current volume and

! subvolume. For example, if the entry is CSVDATA ABCDE, the CSV data files

! produced will be named ABCDE001, ABCDE002, and so on.

! REPORT $a[.#b[.c]]

! if this entry is present, a process category audit report will be

! generated and sent to the spooler collector/location specified.

! NUMCSVS *|ALL|n

! This entry identifies the number of CSV data files to be generated.

! This entry is not required. If not specified, the default is value 1.

! If the parameter value is "*" or "ALL", the maximum number of CSV data

! files will be generated. If the parameter value is n - an integer, n

! number of CSV data files will be generated provided n does not exceed

! the maximum number of files possible.

! DISKCONVERTTO m [w] [p]

! where: m the output disk model number. This entry is required

! when the measurement data file(s) contain(s)

! different Disk subtypes.

! Allowed values are: 4160,4170,4230,4240,4250,4255,

! 4260,4265,4330,4500,4510,4560,4570,4580,4590,4604,

! 4608,4609,4618,4619,4636,4637,4638,4672,BF07255B2C,

! BF0725754B,BF07258243,BF14658244,46144,BF0725A476,

! BF1465A477,BF3005A478, BF072D6186, BF146DA47C,

! BF300DA482,BF450DA483, BF072DAJZN, BF146DAJZP,

! BF300DAJZQ,BF450DAJZR, BF600DAJZT, BF036574C9,

! BF07258222,BF14658227, BF0725A692, BF1465A693,

! BF146DA47A,BF300DA47B, BF300D6188, BF450D6189,

! BF300DASTH,BF450DASTK, BF600DASTL,DG072BB975,

! DH072BB978,DG0146BAHZP,DG0300BAHZQ,DG0146BALVN,

! DG0300BALVP,DG0146FAMWL,EG0146FAWHU,DG0300FAMWN,

! EG0300FAWHV,DH0072BALWL,DH0146BALWN,DH0072FAQRD,

! EH0072FAWJA,DH0146FAQRE,EH0146FAWJB,DG072BAAJA,

! DG146BAAJB,DG0146BAMYQ,DG0300BAMYR,DG0146FARVU,

! DG0300FARVV,EG0146FAWJC,EG0300FAWJD,EH0072FARWC,

! EH0146FARWD,EG0300FBDBR,EG0600FBDBU,DH072BAAKN,

! DG072BABCE,DG146BABCF,DG0146BARTP,DG0300BARTQ,

! EG0146FARTR,EG0300FARTT,EH0072FARUA,EH0146FARUB,

! EG0300FBDSP,EG0600FBDSR,DG146BB976,EG0900FBLSK,

! EG0900FCHHV,EG0600FBLSH,EG0600FCHHU,EH0300FBQDD,

! EG0300FCHHR,EG0300FBLSE,EG0300FBVFL,EG0300FBQDD,

! EH0300FCBVC,EH0146FBQDC,EH0146FCBV,EH0146FCBVB,

! EH0146FAWJB,EO0200FBRVV.

! [w] is an optional field and is only for SAS and SSD disk types,

! valid values can be ON/OFF. By default value will be

! OFF.

! [p] is the number of partitions in the disk. Valid values

! are 1 to 8. This is an optional entry. Default value is 1.

Customizing Your Process Category Control File 35