Tandem Capacity Model (TCM) Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

! DISKFACTOR m r c s readseek [write seek]

! where: m the disk model number for which the default RPM,

! controller type of the disk will be overridden.

! Allowed values are: 4160,4170,4230,4240,4250,4255,

! 4260,4265,4330,4500,4510,4560,4570,4580,4590,4604,

! 4608,4609,4618,4619,4636,4637,4638,4672,BF07255B2C,

! BF0725754B,BF07258243,BF14658244,46144,BF0725A476,

! BF1465A477,BF3005A478, BF072D6186, BF146DA47C,

! BF300DA482,BF450DA483, BF072DAJZN, BF146DAJZP,

! BF300DAJZQ,BF450DAJZR, BF600DAJZT, BF036574C9,

! BF07258222,BF14658227, BF0725A692, BF1465A693,

! BF146DA47A,BF300DA47B, BF300D6188, BF450D6189,

! BF300DASTH,BF450DASTK, BF600DASTL,DG072BB975,

! DH072BB978,DG0146BAHZP,DG0300BAHZQ,DG0146BALVN,

! DG0300BALVP,DG0146FAMWL,EG0146FAWHU,DG0300FAMWN,

! EG0300FAWHV,DH0072BALWL,DH0146BALWN,DH0072FAQRD,

! EH0072FAWJA,DH0146FAQRE,EH0146FAWJB,DG072BAAJA,

! DG146BAAJB,DG0146BAMYQ,DG0300BAMYR,DG0146FARVU,

! DG0300FARVV,EG0146FAWJC,EG0300FAWJD,EH0072FARWC,

! EH0146FARWD,EG0300FBDBR,EG0600FBDBU,DH072BAAKN,

! DG072BABCE,DG146BABCF,DG0146BARTP,DG0300BARTQ,

! EG0146FARTR,EG0300FARTT,EH0072FARUA,EH0146FARUB,

! EG0300FBDSP,EG0600FBDSR,DG146BB976,EG0900FBLSK,

! EG0900FCHHV,EG0600FBLSH,EG0600FCHHU,EH0300FBQDD,

! EG0300FCHHR,EG0300FBLSE,EG0300FBVFL,EG0300FBQDD,

! EH0300FCBVC,EH0146FBQDC,EH0146FCBV,EH0146FCBVB,

! EH0146FAWJB.

! Note: Apart from above overridden disk model numbers,

! five new (extra) disk model numbers can be entered.

! r the RPM value of a disk; this is a positive

! number between 00001 and 99999 of format xxxxx.

! c the disk controller type.

! Allowed values are: MFC, Ext, Snet, FCSA, CLIM.

! s the disk subtype; to be entered when an extra

! record of a new disk is required; subtype is not

! overridden for existing disk model numbers;

! this is a positive number between 49 and 99.

! readseek is the read seek time of the disk in

! milliseconds. This value is a positive number

! between 01.00 to 09.99 of format xx.yy.

! [writeseek] is the write seek time of the disk in

! milliseconds. This is optional; if not specified,

! it will be considered to be same as read seek time.

! This value is a positive number between 01.00

! to 09.99 of format xx.yy.

! SSDDISKFACTOR m [r] [w]

! where: m the disk model number of subtype 50;

! Allowed value is: EO0200FBRVV.

! [r] the read speedup factor.

! [w] the write speedup factor.

! Note: Measure may not display the disk model number

! correctly. Physical checking of disk model number

! used during measurement is recommended.

! ACTUALDISK42 m

! where: m the disk model number of subtype 42;

! Allowed values are: 4608, 4609.

! Note: Measure may not display the disk model number

! correctly. Physical checking of disk model number

! used during measurement is recommended.

! ACTUALDISK43 m

! where: m the disk model number of subtype 43;

! Allowed values are: 4618, 4619.

! Note: Measure may not display the disk model number

! correctly. Physical checking of disk model number

! used during measurement is recommended.

36 Using MeasTCM