Tandem Capacity Model (TCM) Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

! ACTUALDISK44 m

! where: m the disk model number of subtype 44;

! Allowed values are: 4636, 4637, 4638.

! Note: Measure may not display the disk model number

! correctly. Physical checking of disk model number

! used during measurement is recommended.

! ACTUALDISK50 m [w]

! where: m the disk model number of subtype 50;

! Allowed value is: EO0200FBRVV

! [w] this is an optional field for WCE configuration;

! Allowed values are ON or OFF; By default it will be OFF.

! ACTUALDISK51 m [w]

! where: m the disk model number of subtype 51;

! Allowed values are: DG072BB975,DG146BB976,

! DH072BB978,DG0146BAHZP,DG0300BAHZQ,DG0146BALVN,

! DG0300BALVP,DG0146FAMWL,EG0146FAWHU,DG0300FAMWN,

! EG0300FAWHV,DH0072BALWL,DH0146BALWN,DH0072FAQRD,

! EH0072FAWJA,DH0146FAQRE,EH0146FAWJB,DG072BAAJA,

! DG146BAAJB,DG0146BAMYQ,DG0300BAMYR,DG0146FARVU,

! DG0300FARVV,EG0146FAWJC,EG0300FAWJD,EH0072FARWC,

! EH0146FARWD,EG0300FBDBR,EG0600FBDBU,DH072BAAKN,

! DG072BABCE,DG146BABCF,DG0146BARTP,DG0300BARTQ,

! EG0146FARTR,EG0300FARTT,EH0072FARUA,EH0146FARUB,

! EG0300FBDSP,EG0600FBDSR,EG0900FBLSK,EG0900FCHHV,

! EG0600FBLSH,EG0600FCHHU,EH0300FBQDD,EG0300FCHHR,

! EG0300FBLSE,EG0300FBVFL,EG0300FBQDD,EH0300FCBVC,

! EH0146FBQDC,EH0146FCBV,EH0146FCBVB,EH0146FAWJB.

! [w] this is an optional field for WCE configuration;

! Allowed values are ON or OFF; By default it will be OFF.

! ACTUALDISK52 m

! where: m supported disk models for subtype 52;

! Allowed values are: XP24KRG5A, XP24KRG5B, AV482A,

! AV483A.

! where,

! XP24KRG5A stands for XP24K RAID5 (3D+1P) array group

! XP24KRG5B stands for XP24K RAID5 (7D+1P) array group

! AV482A stands for P9500 146GB 6G SAS 15k rpm dual port hard drive

! AV483A stands for P9500 300GB 6G SAS 15k rpm dual port hard drive

! ACTUALDISK53 m

! where: m the disk model number of subtype 53;

! Allowed values are: BF07255B2C, BF0725754B,

! BF07258243, BF14658244,BF0725A476,BF1465A477,

! BF3005A478, BF072D6186, BF146DA47C, BF300DA482,

! BF450DA483, BF072DAJZN, BF146DAJZP, BF300DAJZQ,

! BF450DAJZR, BF600DAJZT, BF036574C9, BF07258222,

! BF14658227, BF0725A692, BF1465A693, BF146DA47A,

! BF300DA47B, BF300D6188, BF450D6189, BF300DASTH,

! BF450DASTK, BF600DASTL.

! NUMTMFTRAIL m

! where: m the total number of audit trails configured;

! Allowed values are between 1 and 16.

!***********************************************************************

MEASURE $data.meas.measdata

CSVLO 2011/11/06;15:10:00

CSVHI 2011/11/06;15:50:00

APPL test

CSVDATA CSVDA

NUMCSVS *

!***********************************************************************

! Syntax for PCAT entries

! -----------------------

! PCATnn B,C,D $E $F.G.H I,J (Process Category aggregate control)

! where: nn "category" number for aggregation, a number between 00

Customizing Your Process Category Control File 37