Tandem Capacity Model (TCM) Manual

Table 5 DISKFACTOR Model, Speed, Controller, Subtype and Seek Times (continued)
Write Seek Time
(ms)
Read Seek Time
(ms)SubtypeControllerRotational Speed
Disk Model
Number
3.012.5851CLIM15000DH072BAAKN
4.44.051CLIM10000DG072BABCE
4.44.051CLIM10000DG146BABCF
4.44.051CLIM10000DG0146BARTP
4.44.051CLIM10000DG0300BARTQ
4.44.051CLIM10000EG0146FARTR
4.44.051CLIM10000EG0300FARTT
3.012.5851CLIM15000EH0072FARUA
3.012.5851CLIM15000EH0146FARUB
4.44.051CLIM10000EG0300FBDSP
4.44.051CLIM10000EG0600FBDSR
3.943.851CLIM10000EG0900FBLSK
3.943.851CLIM10000EG0900FCHHV
3.944.051CLIM10000EG0600FBLSH
3.944.051CLIM10000EG0600FCHHU
3.33.551CLIM15000EH0300FBQDD
3.944.051CLIM10000EG0300FCHHR
3.944.051CLIM10000EG0300FBLSE
3.33.551CLIM15000EG0300FBVFL
3.33.551CLIM15000EG0300FBQDD
3.33.551CLIM15000EH0300FCBVC
3.33.051CLIM15000EH0146FBQDC
3.33.051CLIM15000EH0146FCBV
3.33.051CLIM15000EH0146FCBVB
3.33.051CLIM15000EH0146FAWJB
NANA50CLIM15000EO0200FBRVV
1
1
Supported only on H-series and J-series machines.
Examples
• This example changes the rpm of disk 4608 to 10000, the disk controller type to Ext (the read
seek time is 3.8):
DISKFACTOR 4608 10000 Ext 42 03.80
• This example changes the read seek time of disk BF07255B2C to 4.0, rpm to 10000 and
the disk controller type to CLIM:
DISKFACTOR BF07255B2C 10000 CLIM 53 04.00
• This example creates a new disk model number with the parameters specified:
DISKFACTOR 4610 7200 MFC 80 02.50 02.80
50 Using MeasTCM