Tandem Capacity Model (TCM) Manual

Figure 23 Capacity Baseline—Actual Screen
Working With an Existing Performance Model
1. Start TCM. The “TCM Initial Menu” (page 66) appears.
2. Select Work with an Existing Performance Model and click OK.
3. The Open PM Model dialog box appears so you can specify which Performance model to
open and optionally which WA model to load into that Performance model. Select:
• The custom folder.
• Which model to open–either from a list of available Performance models in the selected
custom folder or by entering the name directly into the Model to Open field. These are
the most common ways to load a Performance model.
If you want to bring new WA data into the Performance model, use the remaining options
to specify the WA model you want to load into the Performance model. Choose one or
more of the following:
◦ WA baselines to load.
◦ Whether to Exit When Done. (This opens the Performance model, loads the WA
baseline if one was chosen, automatically saves the new model, and exits without
displaying the newly created Performance model.)
◦ Whether to display a list of WA baselines.
88 Creating a Performance Model