Tandem Logon Manager for IBM Systems (ILOGMGR) Manual

Control File (ILOGCNTL) For ILOGMGR Example
3-8 127335—Tandem Logon Manager for IBM Systems (ILOGMGR) Manual
Configuring for the ILOGMGR
PATH1 APPL ACBNAME=PATH1, x
AUTH=(ACQ,SPO,PASS)
Control File (ILOGCNTL) For ILOGMGR Example
The control file in the following example is called “ILOGCNTL.”
ILOGMGR=ILM3
*
TLOGMGR=TDMLGR1,TDMAPPLS=(TACL,PATH1)
ROUTCDE=(8,11,12)
RTIMEOUT=30
ILM3, TACL, and PATH1 are VTAM appl names that must be defined in a VTAM
application definition file. See “VTAM Appl Definition File Example” above to see
where those names are specified.
TDMLGR1 is the name of the LU on the IBM system the ILOGMGR uses to
communicate with the TLOGMGR on the Tandem system.
SNAX/APN SCF Configuration File Example
ALTER SUBSYS $SSCP, SNANETID USPALO01
ALTER SUBSYS $SSCP, CPNAME T16CPB
ADD APPL $SSCP.#joe , APPLTYPE LUNSCRE, PASSWORD ‘ABCDEFGH’
==========================================================
== ADD Token-Ring Line $TRP1 associatesubdev $TOKA
==========================================================
ASSUME LINE $TRP1
ADD, RECSIZE 4098, MAXPUS 2, MAXLUS 100, MAXLOCALLUS 10, &
STATION secondary , CHARACTERSET EBCDIC, XPAGES 0, &
SAPINFO (SAP 04, MAXLS 100, DFT 10.10 , DFC 1 )
==========================================================
== ADD Remote PU to Line $TRP1 associatesubdev $TOKA
==========================================================
ADD PU #PU01, ADDRESS 01, RECSIZE 4096, TYPE (13,21),10, &
MAXLUS ASSOCIATESUBDEV $TOKa.#pu01, tRSSAP 4,
TRRMTADDR 04400011760100, & dynamic on,trmaxin
15,trmaxout 15
==========================================================
== Add APPL for CREATOR
==========================================================
ADD APPL $SSCP.#joe , APPLTYPE LUNSCRE, PASSWORD ‘ABCDEFGH’
==========================================================
== Tandem Logon Manager LUs (TLOGMGR - ILOGMGR)
==========================================================