Tandem Logon Manager for IBM Systems (ILOGMGR) Manual

Tandem Logon Manager for IBM Systems (ILOGMGR) Manual—127335 A-1
A
Error Messages and Sense Codes
Error and Informational Messages
The ILOGMGR may issue the following numbered error and informational messages to
the destinations specified in the routing code control record. See “Routing Code Control
Record” on page 3-3 for information about routing code control record configuration.
For information about sense codes and other information that are displayed at the user’s
terminal, see “SNA Sense Codes and User’s Terminal Messages,” later in this section.
For information about VTAM request and VTAM return codes, see the IBM VTAM
Programming Manual (SC31-6421).
T0001
Cause. The ILOGMGR encountered an error while processing the control file.
Effect. The ILOGMGR will not execute. Message T0001 will be followed by one or
more information messages.
Recovery. Correct the control file error and restart the ILOGMGR.
T0002
request-code
is the VTAM request code.
return-code
is the VTAM return code.
Cause. A processing error has caused VTAM to schedule the LERAD or SYNAD exit
routine with the displayed VTAM request code and VTAM return code.
Effect. The ILOGMGR continues execution.
Recovery. Report the VTAM error to VTAM support personnel.
T0001 - CONTROL FILE ERROR
T0002 - (LERAD or SYNAD): RPL RQ=request-code
RTCD=return-code