Tandem Logon Manager for IBM Systems (ILOGMGR) Manual

Error Messages and Sense Codes
Tandem Logon Manager for IBM Systems (ILOGMGR) Manual—127335 A-5
Error and Informational Messages
Cause. VTAM has initiated termination of the ILOGMGR with one of the following
displayed VTAM reason codes:
Effect. The ILOGMGR attempts an orderly termination.
Recovery. Report the termination to ILOGMGR support personnel.
T0012
Cause. This warning message follows T0007 explaining that the ILOGMGR detected
an invalid BIND image length while processing a logon request.
Effect. ILOGMGR processing continues.
Recovery. Report the BIND error to ILOGMGR support personnel.
T0013
Cause. This warning message follows T0007 explaining that the ILOGMGR detected
an invalid user data length while processing a logon request.
Effect. ILOGMGR processing continues.
Recovery. Report the data error to ILOGMGR support personnel.
T0014
appl-name
is the name of an application located on a Tandem system.
vtam-code
is the VTAM reason code received by the TPEND exit routine.
Reason Code Cause
0 The VTAM operator issued a standard HALT command
4 The VTAM operator deactivated the application program or issued a
HALT NET,QUICK command, or VTAM is halting itself in an orderly
fashion because of an internal problem
8 The VTAM operator issued a HALT NET,CANCEL command, or
VTAM is being abnormally terminated
T0012 - BIND IMAGE LENGTH ERROR
T0013 - USER DATA LENGTH ERROR
T0014 - appl-name DEACTIVATED BY VTAM (vtam-code)