Tandem Logon Manager for IBM Systems (ILOGMGR) Manual

Error Messages and Sense Codes
Tandem Logon Manager for IBM Systems (ILOGMGR) Manual—127335 A-9
Error and Informational Messages
2. Define the LU
3. Add PROTOCOL LOGON to the LU
LN4800, %H08010000
Cause. The application could not be started, or communication with the application did
not occur.
Effect. The logon request is rejected.
Recovery. To recover, do one or more of the following:
1. Start Pathmon
2. Check the Creator’s configuration
3. Check to see if the server is running
LS0009, %H08010000
Cause. The SNA logical unit (SNALU) application has not issued an OPEN to the LU.
Effect. The logon request is rejected.
Recovery. Open the LU with the SNALU application.
T0026
tdmappls-object
is the name of the TDMAPPLS object.
acb-open-error-code
is a VTAM access method control block (ACB) open error code.
Cause. A VTAM OPEN request for the displayed TDMAPPLS object failed with the
displayed VTAM ACB open error code. This TDMAPPLS object will not be available
for sessions.
Note. A similar message is sent to the user’s terminal along with the LU name and sense data
from the SNAX/APN line-handler process. See “SNA Sense Codes and User’s Terminal
Messages,” later in this section for information about messages sent to user’s terminals.
T0026 - OPEN ERROR FOR tdmappls-object,
CODE=acb-open-error-code - RETRY