Tandem Logon Manager for IBM Systems (ILOGMGR) Manual

PROGRAM_START_REPLY Record
B-4 127335—Tandem Logon Manager for IBM Systems (ILOGMGR) Manual
Logical Flows and Internal Formats
PROGRAM_START_REPLY Record
PROGRAM_START_REPLY is sent from a TLOGMGR to the ILOGMGR indicating
that the PROGRAM_START_REQ received from the ILOGMGR has been processed.
Table B-2 shows the format of the PROGRAM_START_REPLY record.
PROGRAM_START_ABORT Record
PROGRAM_START_ABORT is sent from the ILOGMGR to a TLOGMGR or from a
TLOGMGR to the ILOGMGR to terminate a session start request. Table B-3 shows the
format of the PROGRAM_START_ABORT record.
18 through 25 SLU name
26 through 27 BIND image length in bytes, but not including this length field
28 through n BIND image — bytes 1-p, or format/type through user request
correlation (URC) fields; see the SNA Network Product Formats manual
n+1 through n+2 User data length in bytes, but not including this length field
n+3 through q User data field
q+1throughq+2 Mode name length in bytes, but not including this length field
q+3 through r Mode name field
r+1 through r+2 Control vector field length in bytes, but not including this length field
r+3 through s Control vectors
Table B-2. PROGRAM_START_REPLY Format
Byte Content
0 through 1 Record length in bytes, but not including this length field
2 Value X’02’ (PROGRAM_START_REPLY request code)
3 through 5 Unused
6 through 9 VTAM’s CID for this session logon request as it appeared in the
PROGRAM_START_REQ
10 through 17 PLU name
18 through 25 SLU name
Table B-1. PROGRAM_START_REQ Format (page 2 of 2)
Byte Content