TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-37
INFO Command
Examples
The following command deletes all SUBNETs under the process $ZTC0:
1-> DELETE SUBNET $ZTC0.*
Considerations

The object-name template (wildcard notation) is supported.

When the DELETE operation is completed, the definition of the SUBNET you
specified for deletion is removed from the subsystem.

All routes defined through the SUBNET are deleted with the SUBNET.
INFO Command
The INFO command displays the current attribute values for the specified TCP/IP
object. Alterable attributes are indicated with an asterisk (*). The INFO command with
the detail option is supported only for the PROCESS object.
This is a nonsensitive command.
INFO ADDRMAP Command
The INFO ADDRMAP command displays the current attribute values for a specific
address map name entry or for all entries in the NonStop TCP/IP X.25 address table.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ADDRMAP addrmap-spec
defines the NonStop TCP/IP X.25 address table name for which information is to
be displayed. The fully-qualified addrrmap-spec has the form:
If you specify the SCF object type (ADDRMAP) or any portion of the object name
(addrmap-spec) in a prior ASSUME command, you can omit it in this command.
For information about the ASSUME command, see the SCF Reference Manual for
G-Series RVUs or the SCF Reference Manual for H-Series RVUs.
INFO [ / OUT file-spec / ] [ ADDRMAP addrmap-spec ]
$process-name . #addrmap-name