TCP/IP Configuration and Management Manual

SCF Reference
TCP/IP Configuration and Management Manual—427132-004
4-38
INFO ENTRY Command
Example
The following command requests information about the specified ADDRMAP:
1->INFO ADDRMAP $ZTC0.#A27
INFO ADDRMAP Display Format
The format of the display for the INFO ADDRMAP command is:
Name
is the name of the ADDRMAP entry.
IPADDRESS
is the IP address.
X121ADDR
is the DTE address.
Last Time Used
is the date and time this entry was last used.
Last Dev/Subdev Used
is the name of the device and subdevice last used for this entry.
INFO ENTRY Command
The INFO ENTRY command displays the ARP or ATMARP table for the given entry. To
display the ATM address entries for SVCs and PVCs use the wildcard character *.
Entries that have the name ATMentry are ATM address entries.
SCF> INFO ADDRMAP $ZTC0.*
TCPIP Info ADDRMAP \SYSA.$ZTC0.*
Name IPADDRESS X121ADDR
#A1 123.456.78.9 12345678901
Last Time Used Last Dev/Subdev Used
21 Sep 1994, 9:18:23.984 \SYS.$X25A.#TCPIP1
Name IPADDRESS X121ADDR
#A2 123.456.789.0 1234512345123
Last Time Used Last Dev/Subdev Used
08 Aug 1994, 1:35:16.123 \SYS.$X25B.#TCPIP2
INFO [ /OUT file-spec/ ] [ ENTRY entry-spec ]
[ , IPADDRESS ip addr ]